Climate change and food security: a Sri Lankan perspective

There is growing concern in Sri Lanka over the impact of climate change, variability and extreme weather events on food production, food security and livelihoods. The link between climate change and food security has been mostly explored in relation to impacts on crop production or food availability aspects of food security, with little focus on other key dimensions, namely food access and food utilization. This review, based on available literature, adopted a food system approach to gain a wider perspective on food security issues in Sri Lanka. It points to several climate-induced issues posing challenges for food security. These issues include declining agriculture productivity, food loss along supply chains, low livelihood resilience of the rural poor and prevalence of high levels of undernourishment and child malnutrition. Our review suggests that achieving food security necessitates action beyond building climate resilient food production systems to a holistic approach that is able to ensure climate resilience of the entire food system while addressing nutritional concerns arising from impacts of climate change. Therefore, there is a pressing need to work towards a climate-smart agriculture system that will address all dimensions of food security. With the exception of productivity of a few crop species, our review demonstrates the dearth of research into climate change impacts on Sri Lanka’s food system. Further research is required to understand how changes in climate may affect other components of the food system including productivity of a wider range of food crops, livestock and fisheries, and shed light on the causal pathways of climate-induced nutritional insecurity.     

Nuclear magnetic resonance logging: Example applications of an emerging tool for environmental investigations

Nuclear magnetic resonance (NMR) geophysical tools have been widely used in the petroleum exploration industry since the 1960s and have improved significantly in the last two decades. These tools can provide estimates of bulk porosity and fluid content, quantification of bound versus mobile fluids, and estimates of hydraulic conductivity (K). Although the size and cost of oil‐field tools historically limited their use for near‐surface applications, smaller and more economical downhole NMR logging tools are now available for detecting and characterizing the formation water content and K to support environmental and groundwater resource investigations. These tools can be deployed using direct‐push drilling techniques or they can be lowered into existing open borings or wells with nonconductive polyvinyl chloride casings and screens. In many cases, using the tool in existing wells offers a safer and more cost‐effective alternative compared to drilling new boreholes. For environmental investigations, NMR can provide useful high‐resolution quantitative hydrostratigraphic information that can provide additional valuable data to further inform and refine the conceptual site model. This paper highlights several NMR field investigations that demonstrate the viability of this technology as a site characterization tool for near‐surface investigations. NMR measurements were compared to data from lithologic logs, cone penetrometer testing data, and prior field hydraulic tests. Use of NMR to detect vadose zone water, including previously unidentified perched groundwater zones, provided hydrostratigraphic details that could not be gleaned from historical well drilling logs and were used to evaluate drainable pore water versus pore water bound in small pores by capillary forces or electrochemically clay‐bond water. NMR also produced K estimates similar to those from conventional hydraulic tests, but the improved vertical resolution from NMR provided additional information regarding the vertical heterogeneity of the formation along the entire length of the well or borehole. Additionally, bench‐scale tests are presented that confirm the capability for NMR to reliably detect and quantify light nonaqueous phase liquid saturation (specifically diesel fuel and weathered gasoline) in situ. The field tests combined with bench‐scale testing results affirm the applicability and potential for NMR as a practical characterization tool that should increasingly be utilized in environmental investigations.     

Flood Risk Reduction from Agricultural Best Management Practices

Best management practices (BMPs) play an important role in improving impaired water quality from conventional row crop agriculture. In addition to reducing nutrient and sediment loads, BMPs such as fertilizer management, reduced tillage, and cover crops could alter the hydrology of agricultural systems and reduce surface water runoff. While attention is devoted to the water quality benefits of BMPs, the potential co‐benefits of flood loss reduction are often overlooked. This study quantifies the effects of selected commonly applied BMPs on expected flood loss to agricultural and urban areas in four Iowa watersheds. The analysis combines a watershed hydrologic model, hydraulic model outputs, and a loss estimation model to determine relationships between hydrologic changes from BMP implementations and annual economic flood loss. The results indicate a modest reduction in peak discharge and economic loss, although loss reduction is substantial when urban centers or other high‐value assets are located downstream in the watershed. Among the BMPs, wetlands, and cover crops reduce losses the most. The research demonstrates that watershed‐scale implementation of agricultural BMPs could provide benefits of flood loss reduction in addition to water quality improvements.     

Effect of saline water ionic strength on phosphorus recovery from synthetic swine wastewater

Declining worldwide phosphate rock reserves has driven a growing interest in exploration of alternative phosphate supplies. This study involved phosphorus recovery from swine wastewater through precipitation of struvite, a valuable slow-release fertiliser. The economic feasibility of this process is highly dependent on the cost of magnesium source. Two different magnesium sources were used for phosphorus recovery: pure magnesium chloride and nanofiltration(NF) saline water retentate. The paper f...     

Current Status of the ADVACATE Process for Flue Gas Desulfurization

The following report discusses current bench- and pilot-plant advances in preparation of ADVAnced siliCATE (ADVACATE) calcium silicate sorbents for flue gas desulfurization. It also discusses current bench- and pilot-plant advances in sorbent preparation. Fly ash was ground in a laboratory scale grinder prior to slurring in order to decrease the slurring time needed for the sorbent to be reactive with SO₂. Reactivity of ADVACATE sorbents with SO₂ in the bench-scale reactor correlated with their surface area.

ADVACATE sorbents produced with ground fly ash were evaluated in the 50 cfm (85 m³/h) pilot plant providing 2 s duct residence time. ADVACATE sorbent was produced by slurrying ground fly ash (median particle size of 4.3 µm) with Ca(OH)₂ at the weight ratio of 3:1 at 90°C (194°F) for 3hto yield solids with 30 weight percent of initial free moisture. When this sorbent was injected into the duct with 1500 ppm SO₂ and at 11°C (20°F) approach to saturation, the measured SO₂ removal was approximately 60percent at a Ca/S stoichiometric ratio of 2. Previously, when ADVACATE sorbent was produced at 90°C (194°F) and at the same fly-ash-to-Ca(OH)₂ weight ratio using unground fly ash, removal under the same conditions in the duct was approximately 50 percent following 12 h slurring. The report presents the results of pilot-scale recycle tests at the recycle ratio of 2. Finally, the report discusses future U.S. Environmental Protection Agency plans for commercialization of ADVACATE.     

Total cobalt determination in human blood and synovial fluid using inductively coupled plasma-mass spectrometry: method validation and evaluation of performance variables affecting metal hip implant patient samples

Inductively coupled plasma with mass spectrometric detection (ICP-MS) has been used for clinical analysis of cobalt (Co) due to its sensitivity and specificity; however, media-specific validation studies are lacking. This study provides data on performance variables affecting differences between selected analytical platforms (Perkin Elmer and Agilent), tissue sample preparation, storage, and interferences affecting measurements in whole blood, serum, and synovial fluid. The limits of detection (LOD) range from 0.2–0.5 µg/L in serum and synovial fluid, and 0.6–1.7 µg Co/L in whole blood. The Agilent platform with collision reaction cell is more sensitive, while the Perkin Elmer platform with dynamic reaction cell demonstrates more polyatomic interferences near the LOD for serum and whole blood. Split sample analysis showed good accuracy, precision, and reproducibility between serum Co measurements using acid digestion or detergent dilution preparations for persons with metal hip implants or following supplement intake. The results demonstrated reliability of the ICP-MS methodology across the two analytical platforms and between two commercial laboratories for Co concentrations above 5 µg Co/L, but digestion procedures and polyatomic interferences may affect measurements in some media at lower concentrations. These studies validate the described ICP-MS methodology for clinical purposes with precautions at low cobalt concentrations (<5 µg Co/L).     

The Market for Waste Vitrification Technology

Waste vitrification technology has largely been developed by the United States Department of Energy (DOE). Numerous vendors offer vitrification units, and a number of commercial and large pilot applications have been made. Nevertheless, the industry is still in its infancy and does not dominate any waste treatment niche. DOE funding of vitrification technology development is nearing an end, and DOE waste treatment is being privatized, with private bidders selecting the technologies and offering to treat wastes for a per-unit fee. Thus, the DOE market is shifting from a cost-plus, largely R&D environment to a fixed-fee environment in which vendors and waste treatment contractors must accept technological risks. Significant quantities of DOE waste are still uncommitted, but the number of vendors is larger than the market can possibly sustain. Domestic private sector opportunities are limited and vendors are looking to foreign markets with less mature treatment capacity and growing demand.     

Performance study on portable water filters

This study explored the effectiveness of five portable water filters for improving certain physical, chemical and biological parameters related to drinking water quality. The parameters investigated included: turbidity, total suspended solids, true and apparent colour, conductivity, pH, alkalinity, hardness, and heterotrophic plate count. In general, ceramic medium water filters improved water quality the greatest and with the incorporation of activated carbon a further reduction in colour and dissolved solids was possible.